Storage
For renters who need coats, towels, or bags on the back of a hollow-core door without drilling. Leave this page if the door is solid-core only, you will use screws, or the hang is above the maker’s stated load.
See current price on Amazon — UDENIS aluminum over-door hanger (6 hooks) on amazon.comAs an Amazon Associate, Hold Lab earns from qualifying purchases — at no extra cost to you.
By Hold Lab desk·Updated 2026-09-16
Listing match, not a hang test. How we pick is on the method page.
Facts from the manufacturer listings.
| UDENIS 6-hook | FYY 2-pack | |
|---|---|---|
| Door thickness | Up to 1.77 in | 1.2–1.4 in (up to 1-3/8 in) |
| Use when | Hollow-core rental door, several hooks on one rack | Confirmed 1-3/8 in hollow-core, two simple hangers |
| Tips / pads | Listing: cushioned pads | Listing: rubber coating |
| Maker’s stated load | About 11 lb per hook | Up to 100 lb claimed — treat as a listing claim |
| Install | Hang over the door. No screws required. | Hang over the door. No screws required. |
| Watch | 11 lb is the maker’s figure, not a Hold Lab hang | 100 lb claim is not a measured hang. Skip thicker doors. |
| Amazon | See current price on Amazon — UDENIS aluminum over-door hanger (6 hooks) on amazon.com | See current price on Amazon — FYY over-door hooks (2-pack, 1-3/8 in door) on amazon.com |
The pick
The listing covers a standard door up to 1.77 inches with a no-drill hang and cushioned pads. A typical hollow-core interior door is 1-3/8 inches, inside that span.
Skip if the door is solid-core only, thicker than 1.77 inches, you will drill, or the hang is above about 11 lb per hook.
As an Amazon Associate, Hold Lab earns from qualifying purchases — at no extra cost to you.
Alternative A
FYY over-door hooks (2-pack, 1-3/8 in door)
Two hangers sized for 1-3/8 inch hollow-core. Skip if the door is thicker than about 1.4 inches. Maker’s 100 lb claim is not a Hold Lab hang.
Pass / Watch / Fail against this job, from the manufacturer listing.
Pass
Listing: up to 1.77 in. A typical US hollow-core interior door is 1-3/8 in (1.375 in).
Pass
Hangs over the door. Listing does not require screws.
Pass
Cushioned pads on the listing, not sticky wall strips.
Watch
Maker says about 11 lb per hook. Stay under that claim.
| Check | Result | From the listing |
|---|---|---|
| Door thickness | Pass | Listing: up to 1.77 in. A typical US hollow-core interior door is 1-3/8 in (1.375 in). |
| No drill | Pass | Hangs over the door. Listing does not require screws. |
| No adhesive | Pass | Cushioned pads on the listing, not sticky wall strips. |
| Stated load | Watch | Maker says about 11 lb per hook. Stay under that claim. |
Slide the bracket over the top of the door. Confirm the door still latches. Keep the hang under the maker’s stated load. Do not add adhesive or drive the optional screws some racks include.
If the door thickness sits inside the listing (typically 1-3/8 in for US interior hollow-core) and you stay under the maker’s stated load.
No for this job. The pick hangs over the door with cushioned pads. Skip this page if you will drive screws — including optional predrilled holes on some racks.
This page is a hollow-core rental match. A solid-core door is often thicker and is a skip here. Measure thickness against the listing before you buy anything else.
The listing for the six-hook rack says the profile is slim enough for most doors to close. If the frame has almost no gap at the top, skip the rack.
Use the maker’s stated load only: about 11 lb per hook on the UDENIS listing. Do not treat Amazon stars or a 100 lb claim on a small hook as a measured hang.
2026-09-16 — Guide published for hollow-core rental doors.
Related: wall hooks · adhesive shelf · under-sink tension rod · all storage guides · Fit Finder · disclosure.